Parts

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 18307 Bearing

The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!

- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap

- Clamps to a threadless steerer - Offers up to 4-1/2" stem height increase - Forged 6061-aluminum provides extra strength - Machined aluminum top cap is threaded, providing easy installation

- Aluminum straddle cable carrier for cantilever brake

Dimension Steel Cogs are splined for BMX and singlespeed hub compatibility. - Steel with chrome finish - Cogs are splined for Shimano BMX and singlespeed hub compatibility - Compatible with 1/2-inch and 1/8-inch chains

A wealth of rise and plenty of backsweep make Dimension Cruiser bars great for a comfortable, upright riding position. - AL-6061 aluminum alloy - ISO4210 safety tested for city/trekking use - Not recommended for use with bar-ends or clip-on aero bars - 50-degree sweep

Dimension Stem Column Adaptors - Total quill length 180mm - Measurement from minimum insertion to top of steerer adaptor is 118mm - Alloy - Quill insertion diameter: 1-inch

Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - 0mm offset

Dimension Alloy seatpost. - 1-piece forged AL-2014 - Clamp Style: Standard Rails - Material: Aluminum - Max Height: 245mm - Min Height: 35mm - Weight: 250g

Dimension's Urban Cruiser Bar is a great way to customize your ride. Available in a variety of configurations to suit your needs and style. - Material: Aluminum - Lever Compatability: Mountain 22.2mm

For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes

With its classic blend of high strength and low weight, Easton's EA50 stem is a smart choice for your favorite ride. It's made of 3D forged aluminum for amazing stiffness and strength. Easton's Top-Lock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing the loads on the bolts, making the EA50 perfectly safe for carbon bars.

EA50 alloy continues to provide both performance and excellent fitment options at a competitive price. From 3D forging processes to our TopLock technology, Easton alloy stems integrate careful design choices into the lineup. The EA50 stem is also compatible with the ICM integrated Garmin mount. - 3D Forged EA50 Alloy - Easton ICM direct-mount faceplate computer mount compatible - TopLock Design for easy bar installation - Finish: Black Ano - Weight: 140 (100mm/7) - Rise: +/- 7 degrees - Clamp Diameter: 31.8mm - Steerer: 1 1/8"

Easton spider and ring assemblies for CINCH cranks.

Easton's EC90 SLX is comprised of advanced carbon construction to make their lightest road bar to-date. This handlebar features Easton’s new MCD shape technology for a unique ride quality and comfort. TaperWall technology and Intelligent Flexibility team up to deliver a perfectly tuned bar that weighs just 190 grams. Shimano, SRAM or Campagnolo levers can be positioned for a smooth transition on the tops and into the bend, with cables wrapped neatly in the bar’s designed recesses. Maximum Contact Drop (MCD)- Designed for comfort when you’re in the zone, MCD packs comfort-enhancing features like extended drops for greater grip range, 5-degree drop flair for increased wrist clearance while sprinting, and increased palm contact to eliminate point-loading that may cause hand fatigue. Weight shown is for 42cm handlebar. - Weight: 195g - Bar Drop (mm): 125 - Drop Bend Style: Compact - Bar Reach (mm): 80 - Material: Carbon - Bar Top Style: Round

Easton’s new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on rough terrain and long gravel assaults. Why 16-degrees? Based on extensive testing and rider feedback we determined that 16 degrees was the perfect balance of maximum bar flare that still allowed for efficient access and usage of the shifters and brakes in both the hoods and drops. - Width (center-to-center): 40cm, 42cm, 44cm, 46cm (+68m at drops) - Flare: 16-degrees - 42cm: 220g - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 120mm - Materials: EC70 carbon

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- Grade 10 chromium steel balls

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

The GP1 Evo is the new benchmark for hand comfort and support, is free of harmful substances and exceeds strict EU quality standards with a SGS certification. The Evo version elevates the original multi-award-winning comfort grip to the highest level of ergonomics and comfortable cycling. Design, development and manufacturing are Made in Germany to guarantee the highest quality product with increased sustainability and minimal waste production. - German made rubber compound is of the purest quality - Forged aluminum clamp, while the inner core of the GP1 Evo is made plastic that we have reinforced with fiberglass - Carbon bar compatible - Alleviates hand and wrist pain with ergonomic design - Large grip is best for riders with large hands, non-dynamic riding, commuting, and city riding - Shape: Ergonomic - Lock On: Yes - Length: 131.9

The GP1 Evo is the new benchmark for hand comfort and support, is free of harmful substances and exceeds strict EU quality standards with a SGS certification. The Evo version elevates the original multi-award-winning comfort grip to the highest level of ergonomics and comfortable cycling. Design, development and manufacturing are Made in Germany to guarantee the highest quality product with increased sustainability and minimal waste production. - German made rubber compound is of the purest quality - Forged aluminum clamp, while the inner core of the GP1 Evo is made plastic that we have reinforced with fiberglass - Carbon bar compatible - Alleviates hand and wrist pain with ergonomic design - Small grip is best for riders with small hands, a dynamic riding style, those wearing thick padded gloves, and riders riding or racing mountain bike terrain - Shape: Ergonomic - Lock On: Yes - Length: 131.9

Based on the popular ST Core Prime shape comes the all-new ST Gel. The ST Gel is designed for the more cost-conscious rider. The orthopedic comfort foam provides a high level of support and comfort over long distances. The gel pads guarantee additional comfort around the sit bones. The relief surfaces are gender specific.

- 3D forged alloy construction - Fits 1-1/8 (28.6mm) steerer forks - Fits 25.4mm handlebar clamp - M6 Black hardware - Weight: 161g (110mm)

FSA Standard Headset Bearings

FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander. - Includes cap, bolt and expander - Top assembly for carbon steerers replaces traditional top cap and star nut assembly

FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander. - Includes cap, bolt and expander - Top assembly for carbon steerers replaces traditional top cap and star nut assembly

Replacement headset bearings from FSA. - Compatible with most Trek MTB integrated headset systems - Sealed bearing for long life - Compatible with Knock Block Headsets

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy